Local treatment guidance · Rio Linda, CA

Water Filters for Rio Linda: What the Record Supports

Matched to Rio Linda's own record: PFAS, lithium. Each option names the certification to check. Not a generic “best filters” list.

Step 1 · What Rio Linda's record shows

Two concerns to filter for. Nothing else detected.

Each card starts from a finding in the published record. The certification is what to look for on the certifier’s listing (NSF, WQA or IAPMO) for the exact model.

Full Rio Linda report →
Concern · filter for this

PFAS

Below limit

PFHxS 4 ng/L, below the 10 ng/L limit (+1 more PFAS detected) (detected below the limit)

If you choose to filter, look for

Reverse osmosis, or carbon certified for PFAS · NSF/ANSI 58 or 53, with PFHxA/PFHxS named on the listing

Concern · filter for this

Lithium

Above screening

Lithium 12.9 µg/L, above the 10.0 µg/L EPA health reference level (above a health screening level, not a legal limit)

If you choose to filter, look for

Depends on the contaminant · The certifier's listing for each named contaminant

28 other contaminants tested, none detected. A non-detect is not a guarantee of zero.All measurements →
Step 2 · Commercial · matched options

No certified match for these concerns yet

Eligibility boundary. A product appears only when its registry-verified certification covers a concern in the record. Verify the exact model and contaminant-specific certification before purchase: certification to a broad standard does not mean every contaminant claim under that standard applies to every model.

A product appears here only when a current certification record covers at least one identified concern; every concern stays listed. The retail offer is looked up afterwards and never changes which products appear or their order. As an Amazon Associate, PurityMap earns from qualifying purchases. Affiliate disclosure.

No product in our catalogue has verified certification for these concerns yet.

Step 3 · Test first

Know what reaches your glass.

A tap test can confirm levels at your home before you choose treatment.

What this data doesn’t tell youPublic water-system monitoring reflects the system, not the water at an individual household tap at a given moment. Home plumbing, fixtures, storage, sampling location and timing can all change what actually reaches your glass.
Step 4 · Local service

Need it installed or tested in Rio Linda?

Get a quote or a certified test from a local professional in Rio Linda, CA. Your request goes to PurityMap by email; we reply to connect you with a local installer or certified lab and share your details only for this request. PurityMap does not sell contact data.

Service
Home

Test your own tap

Screening tells you if something is worth a closer look; a lab result is the number you can act on.

As an Amazon Associate, PurityMap earns from qualifying purchases. Affiliate disclosure.

  • Screening: quick check, not lab-grade

    Watersafe Drinking Water Test Kit

    Silver Lake Research

    Lead, bacteria, nitrate, copper, iron, chlorine, hardness and pH

    • Turnaround: Minutes; the bacteria test can take up to 48 hours

    What it can't tell you: Each test gives a yes/no or a rough range, not a lab number, and it cannot detect PFAS or arsenic.

  • Lab-certified results

    ETR Labs Basic Water Quality Test Kit

    ETR Laboratories

    50+ substances, including lead, copper, arsenic, nitrate, hardness and coliform bacteria

    What it can't tell you: It does not test PFAS, and not every result on the panel falls under the lab's accredited scope.

When your results arrive, read them here →

Sources and methodology

Analysis first, commerce second: retail relationships do not change which products qualify. How PurityMap evaluates recommendations

  • UCMR5 Analytical ResultsUCMR5 Analytical Results: RIO LINDA/ELVERTA COMMUNITY WATER DIST (CA3410018)US EPA · 2026-01-15View source ↗
  • State SDWIS Compliance RecordLead & Copper Rule 90th-percentile: RIO LINDA/ELVERTA COMMUNITY WATER DIST (CA3410018)US EPA SDWIS · 2026-07-09View source ↗
Questions

Frequently asked

What water filter do I need in Rio Linda?

Based on the published record: PFAS (PFHxS 4 ng/L, below the 10 ng/L limit (+1 more PFAS detected); detected below the limit): if you choose to filter, look for reverse osmosis, or carbon certified for pfas, certified to NSF/ANSI 58 or 53, with PFHxA/PFHxS named on the listing; Lithium (Lithium 12.9 µg/L, above the 10.0 µg/L EPA health reference level; above a health screening level, not a legal limit): if you choose to filter, look for depends on the contaminant, certified to The certifier's listing for each named contaminant. If you choose to filter, pick a model whose certification names each contaminant you want to reduce.

Does "NSF certified" mean a filter removes everything?

No. Certification is per contaminant: a filter certified to NSF/ANSI 42 for chlorine taste says nothing about lead or PFAS. Check the certifier's listing (NSF, WQA or IAPMO) for the exact model and the exact contaminant.