Copper
1.37mg/L
Each block = 1.3 mg/L federal action level
Short answer: Copper (90th percentile) is above its federal limit; everything else measured is within its reference or not detected. Logan Co RWD #2 serves 1,146 residents.
Your water bill or annual water quality report names your actual supplier.
The bar is drawn in blocks of the 1.3 mg/L federal action level, so the length shows how far above it the result sits.
1.37mg/L
Each block = 1.3 mg/L federal action level
LOGAN CO RWD #2 (EPA PWSID OK2004206) delivers groundwater to 1,146 residents. This report reflects 0 individual PFAS result(s) from the source UCMR5 observations and the latest Lead & Copper Rule 90th-percentile result. Water hardness and disinfectant type are pending the utility's own annual report.
0health-based violations in the last 10 years
From EPA SDWIS. A clean violation history means no enforcement action was recorded; it does not cover contaminants without a limit.
No result is not a pass. Your utility's annual water quality report may list them, and a certified lab test covers your own tap.
Plumbing inside a home can add lead that the system record can't show. A tap test tells you what reaches your glass.
lead 1.7 µg/L, below the 15 µg/L action level
Copper (90th percentile) 1.37 mg/L, above the 1.3 mg/L federal action level
Screening tells you if something is worth a closer look; a lab result is the number you can act on.
As an Amazon Associate, PurityMap earns from qualifying purchases. Affiliate disclosure.
Screening: quick check, not lab-grade
Silver Lake Research
Lead, bacteria, nitrate, copper, iron, chlorine, hardness and pH
What it can't tell you: Each test gives a yes/no or a rough range, not a lab number, and it cannot detect PFAS or arsenic.
Lab-certified results
ETR Laboratories
50+ substances, including lead, copper, arsenic, nitrate, hardness and coliform bacteria
What it can't tell you: It does not test PFAS, and not every result on the panel falls under the lab's accredited scope.
When your results arrive, read them here →
Each card names which Cimarron City findings its current certification covers, and which it doesn't.
As an Amazon Associate, PurityMap earns from qualifying purchases. A product appears here only when a current certification record covers at least one identified concern; every concern stays listed. The retail offer is looked up afterwards and never changes which products appear or their order. Affiliate disclosure.













PurityMap does not give a safe/unsafe verdict; it shows what the public records measured. For Cimarron City, the lead 90th-percentile result was 1.7 µg/L against the 15 µg/L action level. LOGAN CO RWD #2 (PWSID OK2004206) has a Purity Score of 60/100 (confidence: low), assessed at the water-system level and computed only from contaminants that were measured. Water can change in your own pipes, so a certified test is the only way to know what comes out of your tap.
LOGAN CO RWD #2 (PWS ID OK2004206) is the public water system on record for Cimarron City, Oklahoma, serving about 1,146 people. Confirm the utility on your water bill before acting on a specific finding.
Groundwater (primary source of record in EPA SDWIS).
LOGAN CO RWD #2's most recent lead 90th-percentile result (2026) was 1.7 µg/L, below the 15 µg/L action level. That figure comes from sampled homes; lead usually enters from a building's own pipes and fixtures, so only a test at your tap tells you what you drink.
PurityMap's current record for Cimarron City holds 2 findings: 1 above a reference and 1 detected within the reference. Each finding links to its dated public record; a parameter that was never monitored is shown as pending, not as a pass.
Follow Cimarron City's water
One email when a new sampling round is published, a result moves above or below its reference, or the system's score changes.
Double opt-in: we email a confirmation link. Unsubscribe anytime. No spam.
| Contaminant | Result | Benchmark | Status | Sampled | Source |
|---|---|---|---|---|---|
| Copper (90th percentile) | 1.37 mg/L | 1.3 mg/L federal action level | Above the listed reference | 2025–2025 monitoring period | Lead & Copper Rule 90th-percentile: LOGAN CO RWD #2 (OK2004206) |
| Lead (90th percentile) | 1.7 µg/L | 15 µg/L federal action level | Below the listed reference | 2026–2026 monitoring period (still open) | Lead & Copper Rule 90th-percentile: LOGAN CO RWD #2 (OK2004206) |
Every value is the published result from the cited public record. A reporting limit is the lowest level the method could reliably quantify; a non-detect is not a guarantee of zero.
State SDWIS Compliance Record
Lead & Copper Rule 90th-percentile: LOGAN CO RWD #2 (OK2004206)
US EPA SDWIS
Methodology: how we analyze water. Prepared with AI assistance and reviewed by the PurityMap Editorial Team before publication.
Start with the hot-or-cold tap check. Where Logan Co RWD #2 reported something related, it's shown below.
Lead at Logan Co RWD #2: 1.7 µg/L (90th percentile, 2026 monitoring period (still open)). Lead has no taste, so a taste neither shows nor rules it out.
Copper: 1.37 mg/L (90th percentile, 2025 monitoring period). The federal action level is 1.3 mg/L.