Copper
1.4mg/L
Each block = 1.3 mg/L federal action level
Short answer: Copper (90th percentile) is above its federal limit; everything else measured is within its reference or not detected. Milbank serves 3,544 residents.
This report uses MILBANK. Your water bill or annual water quality report names your actual supplier.
Source: EPA SDWIS 2026Q2.
The bar is drawn in blocks of the 1.3 mg/L federal action level, so the length shows how far above it the result sits.
1.4mg/L
Each block = 1.3 mg/L federal action level
MILBANK (EPA PWSID SD4600207) delivers groundwater to 3,544 residents. This report reflects 0 individual PFAS result(s) from the source UCMR5 observations and the latest Lead & Copper Rule 90th-percentile result. Water hardness and disinfectant type are pending the utility's own annual report.
0health-based violations in the last 10 years
From EPA SDWIS. A clean violation history means no enforcement action was recorded; it does not cover contaminants without a limit.
No result is not a pass. Your utility's annual water quality report may list them, and a certified lab test covers your own tap.
Plumbing inside a home can add lead that the system record can't show. A tap test tells you what reaches your glass.
lead 2 µg/L, below the 15 µg/L action level
Copper (90th percentile) 1.4 mg/L, above the 1.3 mg/L federal action level
Screening tells you if something is worth a closer look; a lab result is the number you can act on.
As an Amazon Associate, PurityMap earns from qualifying purchases. Affiliate disclosure.
Screening: quick check, not lab-grade
Silver Lake Research
Lead, bacteria, nitrate, copper, iron, chlorine, hardness and pH
What it can't tell you: Each test gives a yes/no or a rough range, not a lab number, and it cannot detect PFAS or arsenic.
Lab-certified results
ETR Laboratories
50+ substances, including lead, copper, arsenic, nitrate, hardness and coliform bacteria
What it can't tell you: It does not test PFAS, and not every result on the panel falls under the lab's accredited scope.
When your results arrive, read them here →
Each card names which Milbank findings its current certification covers, and which it doesn't.
As an Amazon Associate, PurityMap earns from qualifying purchases. A product appears here only when a current certification record covers at least one identified concern; every concern stays listed. The retail offer is looked up afterwards and never changes which products appear or their order. Affiliate disclosure.













PurityMap does not give a safe/unsafe verdict; it shows what the public records measured. For Milbank, the lead 90th-percentile result was 2 µg/L against the 15 µg/L action level. MILBANK (PWSID SD4600207) has a Purity Score of 60/100 (confidence: low), assessed at the water-system level and computed only from contaminants that were measured. Water can change in your own pipes, so a certified test is the only way to know what comes out of your tap.
MILBANK (PWS ID SD4600207) is the public water system on record for Milbank, South Dakota, serving about 3,544 people. Confirm the utility on your water bill before acting on a specific finding.
Groundwater (primary source of record in EPA SDWIS).
MILBANK's most recent lead 90th-percentile result (2025) was 2 µg/L, below the 15 µg/L action level. That figure comes from sampled homes; lead usually enters from a building's own pipes and fixtures, so only a test at your tap tells you what you drink.
PurityMap's current record for Milbank holds 2 findings: 1 above a reference and 1 detected within the reference. Each finding links to its dated public record; a parameter that was never monitored is shown as pending, not as a pass.
Follow Milbank's water
One email when a new sampling round is published, a result moves above or below its reference, or the system's score changes.
Double opt-in: we email a confirmation link. Unsubscribe anytime. No spam.
| Contaminant | Result | Benchmark | Status | Sampled | Source |
|---|---|---|---|---|---|
| Copper (90th percentile) | 1.4 mg/L | 1.3 mg/L federal action level | Above the listed reference | 2018–2018 monitoring period | Lead & Copper Rule 90th-percentile: MILBANK (SD4600207) |
| Lead (90th percentile) | 2 µg/L | 15 µg/L federal action level | Below the listed reference | 2025–2025 monitoring period | Lead & Copper Rule 90th-percentile: MILBANK (SD4600207) |
Every value is the published result from the cited public record. A reporting limit is the lowest level the method could reliably quantify; a non-detect is not a guarantee of zero.
State SDWIS Compliance Record
Lead & Copper Rule 90th-percentile: MILBANK (SD4600207)
US EPA SDWIS
Methodology: how we analyze water. Prepared with AI assistance and reviewed by the PurityMap Editorial Team before publication.
Start with the hot-or-cold tap check. Where Milbank reported something related, it's shown below.
Lead at Milbank: 2 µg/L (90th percentile, 2025 monitoring period). Lead has no taste, so a taste neither shows nor rules it out.
Copper: 1.4 mg/L (90th percentile, 2018 monitoring period). The federal action level is 1.3 mg/L.
A ZIP code is a postal area, not a water service area. Your water bill names your supplier.