Short answer: In the 2023–2026 records we hold for Cottonwood Wsd, no listed result is above a legal limit. Also worth knowing: lithium sits above a screening level. 6 substances were detected and 25 were tested and not detected. The water is from Cottonwood WSD, serving 10,867 residents.
Your water bill or annual water quality report names your actual supplier.
Surface water
The treatment details are not on record.
Mains, then your building’s service line.
Plumbing inside the building is outside this record.
No measured result is above a legal limit; lithium sits above a screening level.
29.3 µg/L, sampled 2023-03-07 to 2024-01-09. EPA UCMR 5.
10 µg/L EPA health reference level (screening, not a legal limit).
Detected at up to 29.3 µg/L (above the 10 µg/L EPA health reference level; a screening level, not a legal limit).
Where it enters is not in this record.
Test your own tap first. To reduce it: Depends on the contaminant (The certifier's listing for each named contaminant).
4 ng/L, sampled 2023-03-07 to 2024-01-09. EPA UCMR 5.
4.0 ng/L federal MCL (2024): a legal limit. That limit is judged on a yearly average, and water systems have until 2029 to meet it. EPA health goal (MCLG): 0.
Detected at up to 4 ng/L (below the 4 ng/L limit EPA set in 2024). That limit is judged on a yearly average, and water systems have until 2029 to meet it.
Comes with the source water; home plumbing does not add it.
Test your own tap first. To reduce it: Reverse osmosis, or carbon certified for PFAS (NSF/ANSI 53 or 58 (PFOA/PFOS)).
4.7 ng/L, sampled 2023-03-07 to 2024-01-09. EPA UCMR 5.
2,000 ng/L EPA health advisory (screening, not a legal limit).
Detected at up to 4.7 ng/L (below the 2,000 ng/L EPA health advisory; a screening level, not a legal limit).
Comes with the source water; home plumbing does not add it.
Test your own tap first. To reduce it: Reverse osmosis, or carbon certified for PFAS (NSF/ANSI 53 or 58, with PFBS named on the listing).
5.4 ng/L, sampled 2023-03-07 to 2024-01-09. EPA UCMR 5.
400,000 ng/L Michigan EGLE state MCL (strictest US state): a state limit.
Detected at up to 5.4 ng/L (below the 400,000 ng/L historical comparison reference).
Comes with the source water; home plumbing does not add it.
Test your own tap first. To reduce it: Reverse osmosis, or carbon certified for PFAS (NSF/ANSI 53 or 58, with PFHxA named on the listing).
5.6 ng/L, sampled 2023-03-07 to 2024-01-09. EPA UCMR 5.
No federal limit is on record for it.
Detected at up to 5.6 ng/L. No federal or state limit exists for this substance; shown for transparency, not graded.
Comes with the source water; home plumbing does not add it.
Test your own tap first. To reduce it: Reverse osmosis, or carbon certified for PFAS (NSF/ANSI 53 or 58, with PFBA named on the listing).
6.2 ng/L, sampled 2023-03-07 to 2024-01-09. EPA UCMR 5.
No federal limit is on record for it.
Detected at up to 6.2 ng/L. No federal or state limit exists for this substance; shown for transparency, not graded.
Comes with the source water; home plumbing does not add it.
Test your own tap first. To reduce it: Reverse osmosis, or carbon certified for PFAS (NSF/ANSI 53 or 58, with PFPeA named on the listing).
COTTONWOOD WSD (EPA PWSID CO0118020) delivers surface water to 10,867 residents. This report reflects 29 individual PFAS result(s) from the source UCMR5 observations and the latest Lead & Copper Rule 90th-percentile result. Water hardness and disinfectant type are pending the utility's own annual report.
0health-based violations in the last 10 years
From EPA SDWIS. A clean violation history means no enforcement action was recorded; it does not cover contaminants without a limit.
No result is not a pass. Your utility's annual water quality report may list them, and a certified lab test covers your own tap.
The record describes water leaving treatment and samples across the system. Pipes, solder and fixtures inside a building can add lead the record can’t see, especially in older buildings with lead service lines.
Test your waterMeasured in this report
Sampled across the system
Not in this record
Only a tap test measures it
Know what comes from your tap, starting with a first-draw lead sample.
Compare each result with its named reference in our test reader.
Choose a technology certified for what your test found.
Screening tells you if something is worth a closer look; a lab result is the number you can act on.
As an Amazon Associate, PurityMap earns from qualifying purchases. Affiliate disclosure.
Lab-certified results
ETR Laboratories
50+ substances, including lead, copper, arsenic, nitrate, hardness and coliform bacteria
What it can't tell you: It does not test PFAS, and not every result on the panel falls under the lab's accredited scope.
Screening: quick check, not lab-grade
Silver Lake Research
Lead, bacteria, nitrate, copper, iron, chlorine, hardness and pH
What it can't tell you: Each test gives a yes/no or a rough range, not a lab number, and it cannot detect PFAS or arsenic.
When your results arrive, read them here → · Compare every kit we list
Colorado Department of Public Health & Environment certifies the labs that test drinking water in Colorado. Find a certified lab in Colorado ↗ · What lab tests cost →
| Finding | Reference type | Technology | Certification to check |
|---|---|---|---|
| Lithium29.3 µg/L | Screening level | Depends on the contaminant | The certifier's listing for each named contaminant |
| Perfluorooctanoic acid (PFOA)4 ng/L | Federal MCL | Reverse osmosis, or carbon certified for PFAS | NSF/ANSI 53 or 58 (PFOA/PFOS) |
| Perfluorobutanesulfonic acid (PFBS)4.7 ng/L | Screening level | Reverse osmosis, or carbon certified for PFAS | NSF/ANSI 53 or 58, with PFBS named on the listing |
| Perfluorohexanoic acid (PFHxA)5.4 ng/L | State limit | Reverse osmosis, or carbon certified for PFAS | NSF/ANSI 53 or 58, with PFHxA named on the listing |
| Perfluorobutanoic acid (PFBA)5.6 ng/L | No federal limit | Reverse osmosis, or carbon certified for PFAS | NSF/ANSI 53 or 58, with PFBA named on the listing |
| Perfluoropentanoic acid (PFPeA)6.2 ng/L | No federal limit | Reverse osmosis, or carbon certified for PFAS | NSF/ANSI 53 or 58, with PFPeA named on the listing |
Each card names which Cottonwood Wsd findings its current certification covers, and which it doesn't.
As an Amazon Associate, PurityMap earns from qualifying purchases. A product appears here only when a current certification record covers at least one identified concern; every concern stays listed. The retail offer is looked up afterwards and never changes which products appear or their order. Affiliate disclosure.
Older buildings may have lead service lines, solder or fixtures. Lead is not in Cottonwood Wsd’s published record, so only a tap test tells you. Test first-draw water, then filter if needed.
5 of 29 PFAS tested were detected in Cottonwood Wsd’s record (PFOA 4 ng/L, PFBS 4.7 ng/L and PFHxA 5.4 ng/L, and more). If PFAS matters to you, a filter certification names each compound it covers.
Most utilities keep chlorine or chloramine in the pipes. A carbon filter certified for taste and odor reduces either; your utility can tell you which it uses.
Your utility’s annual water quality report usually lists hardness; a test strip also measures it.
Reverse osmosis reduces many dissolved contaminants, including lead and minerals, at a single faucet, with some water sent to drain.
Get one email when Cottonwood Wsd’s record changes.
One email when a new sampling round is published, a result moves above or below its reference, or the system's score changes.PurityMap does not give a safe/unsafe verdict; it shows what the public records measured. For Cottonwood Wsd, PFAS were detected below their limits, and PFBA 5.6 ng/L and PFPeA 6.2 ng/L with no federal or state limit. COTTONWOOD WSD (PWSID CO0118020) has a Purity Score of 83/100 (confidence: moderate), assessed at the water-system level and computed only from contaminants that were measured. Water can change in your own pipes, so a certified test is the only way to know what comes out of your tap. What we found →
COTTONWOOD WSD (PWS ID CO0118020) is the public water system on record for Cottonwood Wsd, Colorado, serving about 10,867 people. Confirm the utility on your water bill before acting on a specific finding. Water utility →
Surface water (primary source of record in EPA SDWIS). Water utility →
In EPA's UCMR 5 testing (2023-03-07 to 2024-01-09), PFBS was detected at 4.7 ng/L, below the 2,000 ng/L EPA health advisory, PFHxA was detected at 5.4 ng/L, below the 400,000 ng/L state limit and PFOA was detected at 4 ng/L, below the 4 ng/L federal limit. PFBA (5.6 ng/L) and PFPeA (6.2 ng/L) were also detected; they have no federal or state limit. What we found →
Lead is not in Cottonwood Wsd's current published record. Lead usually enters from a building's own pipes and fixtures, so a certified home test is the way to know yours. Your household →
PurityMap's current record for Cottonwood Wsd holds 31 findings: 1 above a reference, 3 detected within the reference, 2 detected with no limit and 25 not detected. Each finding links to its dated public record; a parameter that was never monitored is shown as pending, not as a pass. Records →
| Contaminant | Measured | Reference | Sampled | Source |
|---|---|---|---|---|
| Lithium | 29.3 µg/L | 10 µg/L EPA health reference level (screening, not a legal limit) | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorooctanoic acid (PFOA) | 4 ng/L | 4.0 ng/L federal MCL (2024) | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorobutanesulfonic acid (PFBS) | 4.7 ng/L | 2,000 ng/L EPA health advisory (screening, not a legal limit) | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorohexanoic acid (PFHxA) | 5.4 ng/L | 400,000 ng/L Michigan EGLE state MCL (strictest US state) | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorobutanoic acid (PFBA) | 5.6 ng/L | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluoropentanoic acid (PFPeA) | 6.2 ng/L | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| 11-Chloroeicosafluoro-3-oxaundecane-1-sulfonic acid (11Cl-PF3OUdS) | < 5 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| 1H, 1H, 2H, 2H-perfluorodecane sulfonic acid (8:2 FTS) | < 5 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| 1H, 1H, 2H, 2H-perfluorohexane sulfonic acid (4:2 FTS) | < 3 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| 1H, 1H, 2H, 2H-perfluorooctane sulfonic acid (6:2 FTS) | < 5 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| 4,8-Dioxa-3H-perfluorononanoic acid (ADONA) | < 3 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| 9-Chlorohexadecafluoro-3-oxanone-1-sulfonic acid (9Cl-PF3ONS) | < 2 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Hexafluoropropylene oxide dimer acid (HFPO-DA) (GenX chemicals) | < 5 ng/L (not detected) | 10 ng/L federal MCL (2024) | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Lead (90th percentile) | Not detected | 15 µg/L federal action level | 2026 | EPA SDWIS (Lead & Copper Rule) ↗ (opens in a new tab) |
| N-ethyl perfluorooctanesulfonamidoacetic acid (NEtFOSAA) | < 5 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| N-methyl perfluorooctanesulfonamidoacetic acid (NMeFOSAA) | < 6 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Nonafluoro-3,6-dioxaheptanoic acid (NFDHA) | < 20 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluoro (2-ethoxyethane) sulfonic acid (PFEESA) | < 3 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluoro-3-methoxypropanoic acid (PFMPA) | < 4 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluoro-4-methoxybutanoic acid (PFMBA) | < 3 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorodecanoic acid (PFDA) | < 3 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorododecanoic acid (PFDoA) | < 3 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluoroheptanesulfonic acid (PFHpS) | < 3 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluoroheptanoic acid (PFHpA) | < 3 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorohexanesulfonic acid (PFHxS) | < 3 ng/L (not detected) | 10 ng/L federal MCL (2024) | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorononanoic acid (PFNA) | < 4 ng/L (not detected) | 10 ng/L federal MCL (2024) | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorooctanesulfonic acid (PFOS) | < 4 ng/L (not detected) | 4.0 ng/L federal MCL (2024) | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluoropentanesulfonic acid (PFPeS) | < 4 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorotetradecanoic acid (PFTA) | < 8 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorotridecanoic acid (PFTrDA) | < 7 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluoroundecanoic acid (PFUnA) | < 2 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
UCMR5 Analytical Results
UCMR5 Analytical Results: COTTONWOOD WSD (CO0118020)
US EPA
State SDWIS Compliance Record
Lead & Copper Rule 90th-percentile: COTTONWOOD WSD (CO0118020)
US EPA SDWIS
Methodology: how we analyze water. Prepared with AI assistance and reviewed by the PurityMap Editorial Team before publication.
EPA SDWIS, EPA UCMR 5 and utility reports, each dated and linked.
Units converted to one basis; a non-detect kept distinct from zero.
Each result tagged by reference type: MCL, action level, screening level or aesthetic.
Every value sits against its own reference, never a blended one.
Measured subjects summarised at the water-system level; an open health-based violation caps the score.
Treatment is matched to what was found; a product is called certified only when its current certification names it.
What the Purity Score means: a summary of this water system’s published record, capped while a health-based violation is open. It is not a test of any tap. COTTONWOOD WSD · PWSID CO0118020 · Purity Score 83/100 (Good) · Confidence: moderate · Assessed at the water-system level
Full methodology →Start with the hot-or-cold tap check. Where Cottonwood WSD reported something related, it's shown below.
Lead at Cottonwood WSD: not detected (90th percentile, 2026 monitoring period (still open)). Lead has no taste, so a taste neither shows nor rules it out.