Perfluorooctanoic acid
6.8ng/L
Each block = 4.0 ng/L federal MCL (2024)
Short answer: Two PFAS, PFOA and PFOS, are above their federal limits (2024 limits that water systems have until at least 2029 to meet); everything else measured is within its reference or not detected. Hartford Waterworks serves 15,805 residents.
EPA lists this system for the city. Your water bill or annual water quality report names your actual supplier.
Source: EPA SDWIS 2026Q2.
Each bar is drawn in blocks of the 4.0 ng/L federal MCL (2024), so the length shows how far above it the result sits.
6.8ng/L
Each block = 4.0 ng/L federal MCL (2024)
5.5ng/L
Each block = 4.0 ng/L federal MCL (2024)
HARTFORD WATERWORKS (EPA PWSID WI2670110) delivers groundwater to 15,805 residents. This report reflects 29 individual PFAS result(s) from the source UCMR5 observations and the latest Lead & Copper Rule 90th-percentile result. Water hardness and disinfectant type are pending the utility's own annual report.
0health-based violations in the last 10 years
From EPA SDWIS. A clean violation history means no enforcement action was recorded; it does not cover contaminants without a limit.
No result is not a pass. Your utility's annual water quality report may list them, and a certified lab test covers your own tap.
Plumbing inside a home can add lead that the system record can't show. A tap test tells you what reaches your glass.
PFOA 6.8 ng/L, above the 4 ng/L limit (+3 more PFAS detected)
lead 0.86 µg/L, below the 15 µg/L action level (detected below the limit); 194 lead service lines; 55 galvanized lines to replace (context, not a tap measurement)
Screening tells you if something is worth a closer look; a lab result is the number you can act on.
As an Amazon Associate, PurityMap earns from qualifying purchases. Affiliate disclosure.
Screening: quick check, not lab-grade
Safe Home (EnviroTestKits)
Lead, read as one of three ranges: 0–4, 5–15 or 15+ ppb
What it can't tell you: It shows a lead range, not an exact level, and tests nothing else unless you pay extra for the optional lab test.
Lab-certified results
ETR Laboratories
50+ substances, including lead, copper, arsenic, nitrate, hardness and coliform bacteria
What it can't tell you: It does not test PFAS, and not every result on the panel falls under the lab's accredited scope.
Each card names which Hartford findings its current certification covers, and which it doesn't.
As an Amazon Associate, PurityMap earns from qualifying purchases. A product appears here only when a current certification record covers at least one identified concern; every concern stays listed. The retail offer is looked up afterwards and never changes which products appear or their order. Affiliate disclosure.









PurityMap does not give a safe/unsafe verdict; it shows what the public records measured. For Hartford, PFOA 6.8 ng/L and PFOS 5.5 ng/L were measured above the 4 ng/L federal limit in EPA's 2024 testing; the lead 90th-percentile result was 0.86 µg/L against the 15 µg/L action level. HARTFORD WATERWORKS (PWSID WI2670110) has a Purity Score of 63/100 (confidence: moderate), assessed at the water-system level and computed only from contaminants that were measured. Water can change in your own pipes, so a certified test is the only way to know what comes out of your tap.
HARTFORD WATERWORKS (PWS ID WI2670110) is the public water system on record for Hartford, Wisconsin, serving about 15,805 people. Confirm the utility on your water bill before acting on a specific finding.
Groundwater (primary source of record in EPA SDWIS).
Yes. In EPA's UCMR 5 testing (2024-02-19 to 2024-08-26), PFOA was measured at 6.8 ng/L against a 4 ng/L federal limit and PFOS was measured at 5.5 ng/L against a 4 ng/L federal limit. PFBS (3.2 ng/L, below the 2,000 ng/L EPA health advisory) and PFHxS (6.1 ng/L, below the 10 ng/L federal limit) were also detected. Reverse osmosis and filters certified to NSF/ANSI 53 for PFOA/PFOS reduce them at the tap.
HARTFORD WATERWORKS's most recent lead 90th-percentile result (2023) was 0.86 µg/L, below the 15 µg/L action level. That figure comes from sampled homes; lead usually enters from a building's own pipes and fixtures, so only a test at your tap tells you what you drink.
PurityMap's current record for Hartford holds 31 findings: 2 above a reference, 3 detected within the reference and 26 not detected. Each finding links to its dated public record; a parameter that was never monitored is shown as pending, not as a pass.
Follow Hartford's water
One email when a new sampling round is published, a result moves above or below its reference, or the system's score changes.
Double opt-in: we email a confirmation link. Unsubscribe anytime. No spam.
| Contaminant | Result | Benchmark | Sampled | Source |
|---|---|---|---|---|
| Perfluorooctanoic acid (PFOA) | 6.8 ng/L | 4.0 ng/L federal MCL (2024) | 2024-02-19 to 2024-08-26 | UCMR5 Analytical Results: HARTFORD WATERWORKS (WI2670110) |
| Perfluorooctanesulfonic acid (PFOS) | 5.5 ng/L | 4.0 ng/L federal MCL (2024) | 2024-02-19 to 2024-08-26 | UCMR5 Analytical Results: HARTFORD WATERWORKS (WI2670110) |
| Perfluorohexanesulfonic acid (PFHxS) | 6.1 ng/L | 10 ng/L federal MCL (2024) | 2024-02-19 to 2024-08-26 | UCMR5 Analytical Results: HARTFORD WATERWORKS (WI2670110) |
| Lead (90th percentile) | 0.86 µg/L | 15 µg/L federal action level | 2023–2023 monitoring period | Lead & Copper Rule 90th-percentile: HARTFORD WATERWORKS (WI2670110) |
| Perfluorobutanesulfonic acid (PFBS) | 3.2 ng/L | 2,000 ng/L EPA health advisory (screening, not a legal limit)Screening level, not a legal limit | 2024-02-19 to 2024-08-26 | UCMR5 Analytical Results: HARTFORD WATERWORKS (WI2670110) |
Perfluorooctanesulfonic acid (PFOS)
Perfluorohexanesulfonic acid (PFHxS)
Perfluorobutanesulfonic acid (PFBS)
11-Chloroeicosafluoro-3-oxaundecane-1-sulfonic acid (11Cl-PF3OUdS)
1H, 1H, 2H, 2H-perfluorodecane sulfonic acid (8:2 FTS)
1H, 1H, 2H, 2H-perfluorohexane sulfonic acid (4:2 FTS)
1H, 1H, 2H, 2H-perfluorooctane sulfonic acid (6:2 FTS)
4,8-Dioxa-3H-perfluorononanoic acid (ADONA)
9-Chlorohexadecafluoro-3-oxanone-1-sulfonic acid (9Cl-PF3ONS)
Hexafluoropropylene oxide dimer acid (HFPO-DA) (GenX chemicals)
N-ethyl perfluorooctanesulfonamidoacetic acid (NEtFOSAA)
N-methyl perfluorooctanesulfonamidoacetic acid (NMeFOSAA)
Nonafluoro-3,6-dioxaheptanoic acid (NFDHA)
Perfluoro (2-ethoxyethane) sulfonic acid (PFEESA)
Perfluoro-3-methoxypropanoic acid (PFMPA)
Perfluoro-4-methoxybutanoic acid (PFMBA)
Perfluorododecanoic acid (PFDoA)
Perfluoroheptanesulfonic acid (PFHpS)
Perfluoroheptanoic acid (PFHpA)
Perfluorohexanoic acid (PFHxA)
Perfluoropentanesulfonic acid (PFPeS)
Perfluoropentanoic acid (PFPeA)
Perfluorotetradecanoic acid (PFTA)
Perfluorotridecanoic acid (PFTrDA)
Perfluoroundecanoic acid (PFUnA)
Every value is the published result from the cited public record. A reporting limit is the lowest level the method could reliably quantify; a non-detect is not a guarantee of zero.
UCMR5 Analytical Results
UCMR5 Analytical Results: HARTFORD WATERWORKS (WI2670110)
US EPA
State SDWIS Compliance Record
Lead & Copper Rule 90th-percentile: HARTFORD WATERWORKS (WI2670110)
US EPA SDWIS
Methodology: how we analyze water. Prepared with AI assistance and reviewed by the PurityMap Editorial Team before publication.
Start with the hot-or-cold tap check. Where Hartford Waterworks reported something related, it's shown below.
Lead at Hartford Waterworks: 0.86 µg/L (90th percentile, 2023 monitoring period). Lead has no taste, so a taste neither shows nor rules it out.