Short answer: No measured result is above a legal limit; lithium sits above a screening level, and the water is hard. Metropolitan Utilities District serves 660,000 residents.
EPA lists this system for the city. Your water bill or annual water quality report names your actual supplier.
Source: EPA SDWIS 2026Q2.
METROPOLITAN UTILITIES DISTRICT (EPA PWSID NE3105507) delivers surface water to 660,000 residents. This report reflects 29 individual PFAS result(s) from the source UCMR5 observations and the latest Lead & Copper Rule 90th-percentile result. The utility's 2025 CCR reports hard water and chloramine disinfection.
0health-based violations in the last 10 years
From EPA SDWIS. A clean violation history means no enforcement action was recorded; it does not cover contaminants without a limit.
Plumbing inside a home can add lead that the system record can't show. A tap test tells you what reaches your glass.
lead 12.3 µg/L, below the 15 µg/L action level (detected below the limit); 11,738 lead service lines; 333 galvanized lines to replace (context, not a tap measurement)
Lithium 102 µg/L, above the 10.0 µg/L EPA health reference level
Screening tells you if something is worth a closer look; a lab result is the number you can act on.
As an Amazon Associate, PurityMap earns from qualifying purchases. Affiliate disclosure.
Screening: quick check, not lab-grade
Varify
17 strip readings, including lead, chlorine, fluoride, iron and hardness, plus 2 coliform bacteria tests
What it can't tell you: Strip colors give rough ranges, not lab numbers, and it cannot detect PFAS or arsenic.
Lab-certified results
ETR Laboratories
50+ substances, including lead, copper, arsenic, nitrate, hardness and coliform bacteria
What it can't tell you: It does not test PFAS, and not every result on the panel falls under the lab's accredited scope.
Each card names which Omaha findings its current certification covers, and which it doesn't.
As an Amazon Associate, PurityMap earns from qualifying purchases. A product appears here only when a current certification record covers at least one identified concern; every concern stays listed. The retail offer is looked up afterwards and never changes which products appear or their order. Affiliate disclosure.
PurityMap does not give a safe/unsafe verdict; it shows what the public records measured. For Omaha, no regulated PFAS were detected in EPA's 2024 testing; the lead 90th-percentile result was 12.3 µg/L against the 15 µg/L action level. METROPOLITAN UTILITIES DISTRICT (PWSID NE3105507) has a Purity Score of 84/100 (confidence: high), assessed at the water-system level and computed only from contaminants that were measured. Water can change in your own pipes, so a certified test is the only way to know what comes out of your tap.
METROPOLITAN UTILITIES DISTRICT (PWS ID NE3105507) is the public water system on record for Omaha, Nebraska, serving about 660,000 people. Confirm the utility on your water bill before acting on a specific finding.
Surface water (primary source of record in EPA SDWIS).
None of the 29 PFAS in EPA's UCMR 5 testing (2024-11-04 to 2025-08-04) was detected. "Not detected" means below the lab's reporting limit, not proven zero.
METROPOLITAN UTILITIES DISTRICT's most recent lead 90th-percentile result (2023–2025) was 12.3 µg/L, below the 15 µg/L action level. That figure comes from sampled homes; lead usually enters from a building's own pipes and fixtures, so only a test at your tap tells you what you drink.
PurityMap's current record for Omaha holds 38 findings: 2 above a reference, 7 detected within the reference and 29 not detected. Each finding links to its dated public record; a parameter that was never monitored is shown as pending, not as a pass.
Omaha's water is recorded as 9 gpg, hard. Hardness is an aesthetic and plumbing characteristic, not a health-based limit.
Follow Omaha's water
One email when a new sampling round is published, a result moves above or below its reference, or the system's score changes.
Double opt-in: we email a confirmation link. Unsubscribe anytime. No spam.
11-Chloroeicosafluoro-3-oxaundecane-1-sulfonic acid (11Cl-PF3OUdS)
1H, 1H, 2H, 2H-perfluorodecane sulfonic acid (8:2 FTS)
1H, 1H, 2H, 2H-perfluorohexane sulfonic acid (4:2 FTS)
1H, 1H, 2H, 2H-perfluorooctane sulfonic acid (6:2 FTS)
4,8-Dioxa-3H-perfluorononanoic acid (ADONA)
9-Chlorohexadecafluoro-3-oxanone-1-sulfonic acid (9Cl-PF3ONS)
Hexafluoropropylene oxide dimer acid (HFPO-DA) (GenX chemicals)
N-ethyl perfluorooctanesulfonamidoacetic acid (NEtFOSAA)
N-methyl perfluorooctanesulfonamidoacetic acid (NMeFOSAA)
Nonafluoro-3,6-dioxaheptanoic acid (NFDHA)
Perfluoro (2-ethoxyethane) sulfonic acid (PFEESA)
Perfluoro-3-methoxypropanoic acid (PFMPA)
Perfluoro-4-methoxybutanoic acid (PFMBA)
Perfluorobutanesulfonic acid (PFBS)
Perfluorododecanoic acid (PFDoA)
Perfluoroheptanesulfonic acid (PFHpS)
Perfluoroheptanoic acid (PFHpA)
Perfluorohexanesulfonic acid (PFHxS)
Perfluorohexanoic acid (PFHxA)
Perfluorooctanesulfonic acid (PFOS)
Perfluoropentanesulfonic acid (PFPeS)
Perfluoropentanoic acid (PFPeA)
Perfluorotetradecanoic acid (PFTA)
Perfluorotridecanoic acid (PFTrDA)
Perfluoroundecanoic acid (PFUnA)
Every value is the published result from the cited public record. A reporting limit is the lowest level the method could reliably quantify; a non-detect is not a guarantee of zero.
UCMR5 Analytical Results
UCMR5 Analytical Results: METROPOLITAN UTILITIES DISTRICT (NE3105507)
US EPA
State SDWIS Compliance Record
Lead & Copper Rule 90th-percentile: METROPOLITAN UTILITIES DISTRICT (NE3105507)
US EPA SDWIS
Consumer Confidence Report (CCR)
Metropolitan Utilities District (Omaha) 2025 Consumer Confidence Report (CCR)
Metropolitan Utilities District (Omaha)
Methodology: how we analyze water. Prepared with AI assistance and reviewed by the PurityMap Editorial Team before publication.
Start with the hot-or-cold tap check. Where Metropolitan Utilities District reported something related, it's shown below.
Omaha disinfects with chloramine (utility water-quality report).
Lead at Metropolitan Utilities District: 12.3 µg/L (90th percentile, 2023–2025 monitoring period). Lead has no taste, so a taste neither shows nor rules it out.
Copper: 0.023 mg/L (utility water-quality report, 2025). The federal action level is 1.3 mg/L.