Short answer: No measured result is above a legal limit. Port St Lucie Utilities serves 224,485 residents.
This report uses the largest, PORT ST LUCIE UTILITIES. Your water bill or annual water quality report names your actual supplier.
Source: EPA SDWIS 2026Q2.
PORT ST LUCIE UTILITIES (EPA PWSID FL4560954) delivers groundwater to 224,485 residents. This report reflects 29 individual PFAS result(s) from the source UCMR5 observations and the latest Lead & Copper Rule 90th-percentile result. Water hardness and disinfectant type are pending the utility's own annual report.
0health-based violations in the last 10 years
From EPA SDWIS. A clean violation history means no enforcement action was recorded; it does not cover contaminants without a limit.
No result is not a pass. Your utility's annual water quality report may list them, and a certified lab test covers your own tap.
Plumbing inside a home can add lead that the system record can't show. A tap test tells you what reaches your glass.
lead 4.6 µg/L, below the 15 µg/L action level (detected below the limit); 12 galvanized lines to replace (context, not a tap measurement)
Screening tells you if something is worth a closer look; a lab result is the number you can act on.
As an Amazon Associate, PurityMap earns from qualifying purchases. Affiliate disclosure.
Screening: quick check, not lab-grade
Safe Home (EnviroTestKits)
Lead, read as one of three ranges: 0–4, 5–15 or 15+ ppb
What it can't tell you: It shows a lead range, not an exact level, and tests nothing else unless you pay extra for the optional lab test.
Lab-certified results
ETR Laboratories
50+ substances, including lead, copper, arsenic, nitrate, hardness and coliform bacteria
What it can't tell you: It does not test PFAS, and not every result on the panel falls under the lab's accredited scope.
Each card names which Port St. Lucie findings its current certification covers, and which it doesn't.
As an Amazon Associate, PurityMap earns from qualifying purchases. A product appears here only when a current certification record covers at least one identified concern; every concern stays listed. The retail offer is looked up afterwards and never changes which products appear or their order. Affiliate disclosure.
PurityMap does not give a safe/unsafe verdict; it shows what the public records measured. For Port St. Lucie, no regulated PFAS were detected in EPA's 2024 testing; the lead 90th-percentile result was 4.6 µg/L against the 15 µg/L action level. PORT ST LUCIE UTILITIES (PWSID FL4560954) has a Purity Score of 95/100 (confidence: moderate), assessed at the water-system level and computed only from contaminants that were measured. Water can change in your own pipes, so a certified test is the only way to know what comes out of your tap.
PORT ST LUCIE UTILITIES (PWS ID FL4560954) is the public water system on record for Port St. Lucie, Florida, serving about 224,485 people. Confirm the utility on your water bill before acting on a specific finding.
Groundwater (primary source of record in EPA SDWIS).
None of the 29 PFAS in EPA's UCMR 5 testing (2025-03-07 to 2025-09-15) was detected. "Not detected" means below the lab's reporting limit, not proven zero.
PORT ST LUCIE UTILITIES's most recent lead 90th-percentile result (2023) was 4.6 µg/L, below the 15 µg/L action level. That figure comes from sampled homes; lead usually enters from a building's own pipes and fixtures, so only a test at your tap tells you what you drink.
PurityMap's current record for Port St. Lucie holds 31 findings: 1 detected within the reference and 30 not detected. Each finding links to its dated public record; a parameter that was never monitored is shown as pending, not as a pass.
Follow Port St. Lucie's water
One email when a new sampling round is published, a result moves above or below its reference, or the system's score changes.
Double opt-in: we email a confirmation link. Unsubscribe anytime. No spam.
| Contaminant | Result | Benchmark | Sampled | Source |
|---|---|---|---|---|
| Lead (90th percentile) | 4.6 µg/L | 15 µg/L federal action level | 2023–2023 monitoring period | Lead & Copper Rule 90th-percentile: PORT ST LUCIE UTILITIES (FL4560954) |
11-Chloroeicosafluoro-3-oxaundecane-1-sulfonic acid (11Cl-PF3OUdS)
1H, 1H, 2H, 2H-perfluorodecane sulfonic acid (8:2 FTS)
1H, 1H, 2H, 2H-perfluorohexane sulfonic acid (4:2 FTS)
1H, 1H, 2H, 2H-perfluorooctane sulfonic acid (6:2 FTS)
4,8-Dioxa-3H-perfluorononanoic acid (ADONA)
9-Chlorohexadecafluoro-3-oxanone-1-sulfonic acid (9Cl-PF3ONS)
Hexafluoropropylene oxide dimer acid (HFPO-DA) (GenX chemicals)
N-ethyl perfluorooctanesulfonamidoacetic acid (NEtFOSAA)
N-methyl perfluorooctanesulfonamidoacetic acid (NMeFOSAA)
Nonafluoro-3,6-dioxaheptanoic acid (NFDHA)
Perfluoro (2-ethoxyethane) sulfonic acid (PFEESA)
Perfluoro-3-methoxypropanoic acid (PFMPA)
Perfluoro-4-methoxybutanoic acid (PFMBA)
Perfluorobutanesulfonic acid (PFBS)
Perfluorododecanoic acid (PFDoA)
Perfluoroheptanesulfonic acid (PFHpS)
Perfluoroheptanoic acid (PFHpA)
Perfluorohexanesulfonic acid (PFHxS)
Perfluorohexanoic acid (PFHxA)
Perfluorooctanesulfonic acid (PFOS)
Perfluoropentanesulfonic acid (PFPeS)
Perfluoropentanoic acid (PFPeA)
Perfluorotetradecanoic acid (PFTA)
Perfluorotridecanoic acid (PFTrDA)
Perfluoroundecanoic acid (PFUnA)
Every value is the published result from the cited public record. A reporting limit is the lowest level the method could reliably quantify; a non-detect is not a guarantee of zero.
UCMR5 Analytical Results
UCMR5 Analytical Results: PORT ST LUCIE UTILITIES (FL4560954)
US EPA
State SDWIS Compliance Record
Lead & Copper Rule 90th-percentile: PORT ST LUCIE UTILITIES (FL4560954)
US EPA SDWIS
Methodology: how we analyze water. Prepared with AI assistance and reviewed by the PurityMap Editorial Team before publication.
Start with the hot-or-cold tap check. Where Port St Lucie Utilities reported something related, it's shown below.
Lead at Port St Lucie Utilities: 4.6 µg/L (90th percentile, 2023 monitoring period). Lead has no taste, so a taste neither shows nor rules it out.