Is St. George tap water safe to drink?

Yes but with caveats

St. George's water meets EPA minimum standards but has some concerns. Filtration is recommended for sensitive individuals.

78/100

Purity Score

Issues Found

12 GPG

Hardness

Not detected

PFAS

2 Issues Detected in St. George

Very Hard Water (12 GPG)

Hard water causes scale in pipes and shortens appliance lifespan.

Hardness data for St. George

Arsenic Approaching Limit (0.3 mg/L)

EPA limit is 0.010 mg/L.

Arsenic info for St. George

Fix Your Water — See Recommended Filters

Utah

8,477,084,790 · Quail Creek Reservoir and Sand Hollow

St. George Water Quality Report: Very Hard Water Detected

Moderate Risk Updated March 2026 95,342 residents

See Best Filters for St. George

Purity Score

Mineral content in St. George's water supply rates as very hard. This guide covers what that means for your home and which filters or softeners address it best.

Water Quality Data

Not detected (1.8 ppb)

Very hard softener recommended.

Hard water in St. George

Chlorine

Low

Affects taste and skin. Carbon filter removes it.

Learn about chlorine

TDS

Unknown

High TDS (>500 ppm) may affect taste.

Contaminant Levels

PFAS

Lead

1.8 ppb

Nitrate

0.5 mg/L

Arsenic

0.3 mg/L

Hardness

12 gpg

Health Insights

1
With a hardness of 12 GPG, St. George residents may notice white scale on faucets. Hard water increases maintenance costs.

Score

78 /100

Good

"Good" threshold (70)

St. George tap water is sourced from Quail Creek Reservoir and Sand Hollow and treated by City of St. George Water. Water hardness is very hard at 12.0 GPG which may cause scale buildup. TDS is 430 ppm which is above the EPA secondary guideline of 500 ppm. Overall purity score: 78/100 (Good). Updated for 2026.

Fix Your Water

Best filters matched to St. George's 2 issues.

See Filters

MATCHED TO ST. GEORGE'S WATER DATA

Best Water Filters for St. George, UT (2026)

Matched to Very Hard Water (12 GPG) in St. George.

Very Hard Water (12 GPG)

Best Overall #1 for St. George

AFWFilters 5600sxt 48000 Grain Softener

Salt-Based Water Softener

$650-750

Why this fits St. George

Handles St. George's hard water (Very Hard Water (12 GPG))
Premium quality at $650-750

Pros & Cons +

48000 grain capacity handles very hard water

Digital metered valve saves salt

Requires salt refills monthly

Does not remove contaminants

Fix Your Water — Check Price

Best Value

Clearly Filtered Water Pitcher

Pitcher Filter

$80-95

Why this fits St. George

NSF/ANSI 42 + NSF/ANSI 53 + NSF/ANSI 401 certified
Budget-friendly at $80-95

Pros & Cons +

No installation fill and pour

Removes 365+ contaminants including PFAS

Small capacity 2-3 people

Filter replacements every 4 months

Check Price on Amazon

Also Recommended

Waterdrop 10UA Under-Sink Filter

Under-Sink Carbon Filter

$40-60

Why this fits St. George

NSF/ANSI 42 certified
Budget-friendly at $40-60

Pros & Cons +

Very affordable

Easy DIY install no plumber

Does not remove PFAS or hardness

Single point of use only

Check Price on Amazon

Also Recommended

Waterdrop G3P800 Tankless RO

Tankless Reverse Osmosis

$380-450

Why this fits St. George

NSF/ANSI 58 + NSF 372 certified
Premium quality at $380-450

Pros & Cons +

No tank saves cabinet space

800 GPD fast flow rate

Higher upfront cost

Filter replacements are proprietary

Check Price on Amazon

As an Amazon Associate, PurityMap may earn from qualifying purchases. Based on latest St. George water data.

Full Filter Comparison for St. George

Know exactly what's in YOUR tap

City data shows averages. Your home may differ.

Test Your Water — $25-30

About St. George's Water

Hard Water in St. George: Impact on Plumbing and Appliances

At 12 grains per gallon, St. George's water qualifies as very hard. Hard water carries dissolved calcium and magnesium that deposit as limescale inside pipes, water heaters, dishwashers, and washing machines over time. Scale accumulation reduces appliance efficiency and shortens service life. A salt-based water softener is the most effective solution for whole-home protection. For drinking water only, a reverse osmosis system also reduces mineral content significantly.

Explore St. George Water Data

St. George Water FAQ

Is St. George UT tap water safe to drink in 2026?

St. George tap water meets EPA federal drinking water standards and scores 78/100 (Good) on PurityMap for 2026. For most healthy adults the water is considered safe but point-of-use filtration adds an important layer of protection.

Does St. George UT use chlorine or chloramine for disinfection?

St. George uses chloramine as the primary disinfectant with a residual level of 1.0 ppm. Chloramine is harder to remove than free chlorine and requires a catalytic carbon or reverse osmosis filter. Standard Brita-style pitchers will NOT remove chloramine.

How hard is St. George UT water and what is the TDS level?

St. George water hardness is 12.0 grains per gallon (very hard) with a TDS of 430 ppm (poor). This level causes noticeable scale buildup in water heaters kettles and dishwashers. A water softener is recommended to protect plumbing and reduce soap usage.

Has PFAS been found in St. George UT drinking water?

Based on available EPA UCMR5 monitoring data as of 2026 PFAS have not been detected above EPA advisory levels in St. George drinking water.

What is the best water filter for St. George?

Based on St. George's water profile, we recommend the AFWFilters 5600sxt 48000 Grain Softener. St. George has hard water at 12.0 GPG. A water softener prevents scale buildup in water heaters pipes and appliances.

Nearby Reports

West Valley CityUtah — 78/100 West JordanUtah — 78/100 OremUtah — 81/100 SandyUtah — 81/100 ProvoUtah — 82/100 OgdenUtah — 82/100

All Utah cities

Explore Water Quality by State

Compare across all 50 US states

View All States

Data Sources

EPA SDWIS
EWG Tap Water Database
City of St. George Water CCR
USGS monitoring data

PurityMap compiles public data. Updated March 2026.

Link copied!