Short answer: In the 2023–2025 records we hold for Syracuse, no listed result is above a legal limit. Also worth knowing: lithium sits above a screening level. 4 substances were detected and 27 were tested and not detected. The water is from Syracuse City Water System, serving 35,561 residents.
Your water bill or annual water quality report names your actual supplier.
Surface water
The treatment details are not on record.
Mains, then your building’s service line.
Plumbing inside the building is outside this record.
No measured result is above a legal limit; lithium sits above a screening level.
11 µg/L, sampled 2023-02-27 to 2023-11-07. EPA UCMR 5.
10 µg/L EPA health reference level (screening, not a legal limit).
Detected at up to 11 µg/L (above the 10 µg/L EPA health reference level; a screening level, not a legal limit).
Where it enters is not in this record.
Test your own tap first. To reduce it: Depends on the contaminant (The certifier's listing for each named contaminant).
2.6 µg/L, sampled 2023–2025 monitoring period. EPA SDWIS (Lead & Copper Rule).
15 µg/L federal action level. EPA health goal (MCLG): 0.
The 90th-percentile tap result was 2.6 µg/L (below the 15 µg/L action level).
Usually from lead service lines, solder and fixtures inside buildings, after the water leaves treatment.
Test your own tap first. To reduce it: Lead-certified carbon filter, or reverse osmosis (NSF/ANSI 53 (lead)).
3.6 ng/L, sampled 2023-03-29 to 2024-01-09. EPA UCMR 5.
2,000 ng/L EPA health advisory (screening, not a legal limit).
Detected at up to 3.6 ng/L (below the 2,000 ng/L EPA health advisory; a screening level, not a legal limit).
Comes with the source water; home plumbing does not add it.
Test your own tap first. To reduce it: Reverse osmosis, or carbon certified for PFAS (NSF/ANSI 53 or 58, with PFBS named on the listing).
7.4 ng/L, sampled 2023-03-29 to 2024-01-09. EPA UCMR 5.
No federal limit is on record for it.
Detected at up to 7.4 ng/L. No federal or state limit exists for this substance; shown for transparency, not graded.
Comes with the source water; home plumbing does not add it.
Test your own tap first. To reduce it: Reverse osmosis, or carbon certified for PFAS (NSF/ANSI 53 or 58, with PFBA named on the listing).
SYRACUSE CITY WATER SYSTEM (EPA PWSID UTAH06012) delivers surface water to 35,561 residents. This report reflects 29 individual PFAS result(s) from the source UCMR5 observations and the latest Lead & Copper Rule 90th-percentile result. Water hardness and disinfectant type are pending the utility's own annual report.
0health-based violations in the last 10 years
From EPA SDWIS. A clean violation history means no enforcement action was recorded; it does not cover contaminants without a limit.
No result is not a pass. Your utility's annual water quality report may list them, and a certified lab test covers your own tap.
The record describes water leaving treatment and samples across the system. Pipes, solder and fixtures inside a building can add lead the record can’t see, especially in older buildings with lead service lines.
Test your waterMeasured in this report
Sampled across the system
Not in this record
Only a tap test measures it
Know what comes from your tap, starting with a first-draw lead sample.
Compare each result with its named reference in our test reader.
Choose a technology certified for what your test found.
Screening tells you if something is worth a closer look; a lab result is the number you can act on.
As an Amazon Associate, PurityMap earns from qualifying purchases. Affiliate disclosure.
Lab-certified results
ETR Laboratories
50+ substances, including lead, copper, arsenic, nitrate, hardness and coliform bacteria
What it can't tell you: It does not test PFAS, and not every result on the panel falls under the lab's accredited scope.
Screening: quick check, not lab-grade
Safe Home (EnviroTestKits)
Lead, read as one of three ranges: 0–4, 5–15 or 15+ ppb
What it can't tell you: It shows a lead range, not an exact level, and tests nothing else unless you pay extra for the optional lab test.
When your results arrive, read them here → · Compare every kit we list
Utah Department of Health & Human Services certifies the labs that test drinking water in Utah. Find a certified lab in Utah ↗ · What lab tests cost →
| Finding | Reference type | Technology | Certification to check |
|---|---|---|---|
| Lithium11 µg/L | Screening level | Depends on the contaminant | The certifier's listing for each named contaminant |
| Lead (90th percentile)2.6 µg/L | Action level | Lead-certified carbon filter, or reverse osmosis | NSF/ANSI 53 (lead) |
| Perfluorobutanesulfonic acid (PFBS)3.6 ng/L | Screening level | Reverse osmosis, or carbon certified for PFAS | NSF/ANSI 53 or 58, with PFBS named on the listing |
| Perfluorobutanoic acid (PFBA)7.4 ng/L | No federal limit | Reverse osmosis, or carbon certified for PFAS | NSF/ANSI 53 or 58, with PFBA named on the listing |
Each card names which Syracuse findings its current certification covers, and which it doesn't.
As an Amazon Associate, PurityMap earns from qualifying purchases. A product appears here only when a current certification record covers at least one identified concern; every concern stays listed. The retail offer is looked up afterwards and never changes which products appear or their order. Affiliate disclosure.
Ask your utility first
Water utilities keep an inventory of service-line materials. Ask Syracuse City Water System whether your address is on it before you replace pipes.
Local help
Call to be connected with a local plumbing provider about lead service lines, repiping or fixture replacement.
Older buildings may have lead service lines, solder or fixtures. Syracuse’s record shows lead at 2.6 µg/L (15 µg/L federal action level). Test first-draw water, then filter if needed.
2 of 29 PFAS tested were detected in Syracuse’s record (PFBS 3.6 ng/L and PFBA 7.4 ng/L). If PFAS matters to you, a filter certification names each compound it covers.
Most utilities keep chlorine or chloramine in the pipes. A carbon filter certified for taste and odor reduces either; your utility can tell you which it uses.
Your utility’s annual water quality report usually lists hardness; a test strip also measures it.
Reverse osmosis reduces many dissolved contaminants, including lead and minerals, at a single faucet, with some water sent to drain.
Get one email when Syracuse’s record changes.
One email when a new sampling round is published, a result moves above or below its reference, or the system's score changes.PurityMap does not give a safe/unsafe verdict; it shows what the public records measured. For Syracuse, PFAS were detected below their limits, and PFBA 7.4 ng/L with no federal or state limit; the lead 90th-percentile result was 2.6 µg/L against the 15 µg/L action level. SYRACUSE CITY WATER SYSTEM (PWSID UTAH06012) has a Purity Score of 97/100 (confidence: moderate), assessed at the water-system level and computed only from contaminants that were measured. Water can change in your own pipes, so a certified test is the only way to know what comes out of your tap. What we found →
SYRACUSE CITY WATER SYSTEM (PWS ID UTAH06012) is the public water system on record for Syracuse, Utah, serving about 35,561 people. Confirm the utility on your water bill before acting on a specific finding. Water utility →
Surface water (primary source of record in EPA SDWIS). Water utility →
In EPA's UCMR 5 testing (2023-03-29 to 2024-01-09), PFBS was detected at 3.6 ng/L, below the 2,000 ng/L EPA health advisory. PFBA (7.4 ng/L) was also detected; it has no federal or state limit. What we found →
SYRACUSE CITY WATER SYSTEM's most recent lead 90th-percentile result (2023–2025) was 2.6 µg/L, below the 15 µg/L action level. That figure comes from sampled homes; lead usually enters from a building's own pipes and fixtures, so only a test at your tap tells you what you drink. Your household →
PurityMap's current record for Syracuse holds 31 findings: 1 above a reference, 2 detected within the reference, 1 detected with no limit and 27 not detected. Each finding links to its dated public record; a parameter that was never monitored is shown as pending, not as a pass. Records →
| Contaminant | Measured | Reference | Sampled | Source |
|---|---|---|---|---|
| Lithium | 11 µg/L | 10 µg/L EPA health reference level (screening, not a legal limit) | 2023 | EPA UCMR 5 ↗ (opens in a new tab) |
| Lead (90th percentile) | 2.6 µg/L | 15 µg/L federal action level | 2023–2025 | EPA SDWIS (Lead & Copper Rule) ↗ (opens in a new tab) |
| Perfluorobutanesulfonic acid (PFBS) | 3.6 ng/L | 2,000 ng/L EPA health advisory (screening, not a legal limit) | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorobutanoic acid (PFBA) | 7.4 ng/L | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| 11-Chloroeicosafluoro-3-oxaundecane-1-sulfonic acid (11Cl-PF3OUdS) | < 5 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| 1H, 1H, 2H, 2H-perfluorodecane sulfonic acid (8:2 FTS) | < 5 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| 1H, 1H, 2H, 2H-perfluorohexane sulfonic acid (4:2 FTS) | < 3 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| 1H, 1H, 2H, 2H-perfluorooctane sulfonic acid (6:2 FTS) | < 5 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| 4,8-Dioxa-3H-perfluorononanoic acid (ADONA) | < 3 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| 9-Chlorohexadecafluoro-3-oxanone-1-sulfonic acid (9Cl-PF3ONS) | < 2 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Hexafluoropropylene oxide dimer acid (HFPO-DA) (GenX chemicals) | < 5 ng/L (not detected) | 10 ng/L federal MCL (2024) | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| N-ethyl perfluorooctanesulfonamidoacetic acid (NEtFOSAA) | < 5 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| N-methyl perfluorooctanesulfonamidoacetic acid (NMeFOSAA) | < 6 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Nonafluoro-3,6-dioxaheptanoic acid (NFDHA) | < 20 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluoro (2-ethoxyethane) sulfonic acid (PFEESA) | < 3 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluoro-3-methoxypropanoic acid (PFMPA) | < 4 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluoro-4-methoxybutanoic acid (PFMBA) | < 3 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorodecanoic acid (PFDA) | < 3 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorododecanoic acid (PFDoA) | < 3 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluoroheptanesulfonic acid (PFHpS) | < 3 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluoroheptanoic acid (PFHpA) | < 3 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorohexanesulfonic acid (PFHxS) | < 3 ng/L (not detected) | 10 ng/L federal MCL (2024) | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorohexanoic acid (PFHxA) | < 3 ng/L (not detected) | 400,000 ng/L Michigan EGLE state MCL (strictest US state) | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorononanoic acid (PFNA) | < 4 ng/L (not detected) | 10 ng/L federal MCL (2024) | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorooctanesulfonic acid (PFOS) | < 4 ng/L (not detected) | 4.0 ng/L federal MCL (2024) | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorooctanoic acid (PFOA) | < 4 ng/L (not detected) | 4.0 ng/L federal MCL (2024) | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluoropentanesulfonic acid (PFPeS) | < 4 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluoropentanoic acid (PFPeA) | < 3 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorotetradecanoic acid (PFTA) | < 8 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluorotridecanoic acid (PFTrDA) | < 7 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
| Perfluoroundecanoic acid (PFUnA) | < 2 ng/L (not detected) | No federal or state limit; shown for transparency | 2023–2024 | EPA UCMR 5 ↗ (opens in a new tab) |
UCMR5 Analytical Results
UCMR5 Analytical Results: SYRACUSE CITY WATER SYSTEM (UTAH06012)
US EPA
State SDWIS Compliance Record
Lead & Copper Rule 90th-percentile: SYRACUSE CITY WATER SYSTEM (UTAH06012)
US EPA SDWIS
Methodology: how we analyze water. Prepared with AI assistance and reviewed by the PurityMap Editorial Team before publication.
EPA SDWIS, EPA UCMR 5 and utility reports, each dated and linked.
Units converted to one basis; a non-detect kept distinct from zero.
Each result tagged by reference type: MCL, action level, screening level or aesthetic.
Every value sits against its own reference, never a blended one.
Measured subjects summarised at the water-system level; an open health-based violation caps the score.
Treatment is matched to what was found; a product is called certified only when its current certification names it.
What the Purity Score means: a summary of this water system’s published record, capped while a health-based violation is open. It is not a test of any tap. SYRACUSE CITY WATER SYSTEM · PWSID UTAH06012 · Purity Score 97/100 (Excellent) · Confidence: moderate · Assessed at the water-system level
Full methodology →Start with the hot-or-cold tap check. Where Syracuse City Water System reported something related, it's shown below.
Lead at Syracuse City Water System: 2.6 µg/L (90th percentile, 2023–2025 monitoring period). Lead has no taste, so a taste neither shows nor rules it out.